12 Place Fire Extinguisher Storage Rack W/ Legs (2x6)

Capacity: 12 fire extinguishers (20 lb or 30 lb) Configuration: 2 x 6 layout Slot Size: 8.5" x 8.5" square Overall Dimensions: 56" L x 22" W x 23" H Leg Height: 10" Material: Heavy-duty steel with expanded metal base and sides Finish: Powder-coated safety yellow Transport: Built-in forklift pockets Designed for: OSHA 1910.157, NFPA 10 Origin: Made in USA Shipping: Free — continental United States

• Narrow 2x6 Profile — At just 22 inches wide and 56 inches long, this rack fits flush against walls, along aisles, and in spaces where a wider rack would obstruct traffic.

• Expanded Metal Base & Sides — Self-cleaning design lets dirt, water, and debris fall through. No manual cleanout.

• Powder-Coated Safety Yellow — OSHA 1910.144 high-visibility finish. Resists chipping, scratching, and corrosion.

• Built-In Forklift Pockets — Move the fully loaded rack without unloading. No disassembly required.

• 10-Inch Legs — Elevates extinguishers above floor hazards. Exceeds OSHA 4-inch minimum clearance.

• Discharge Identification — Open-slot design lets you visually spot discharged units without pulling them out. Cuts recharging service time.

This rack supports compliance with:

• OSHA 1910.157 — Portable fire extinguisher accessibility, mounting height, and travel distance requirements • OSHA 1910.144 — Safety yellow color coding for caution • NFPA 10 — Storage, spacing, monthly inspection, and annual maintenance standards

Also available in 3x4 configuration (SH10036) for spaces where a squarer footprint is preferred.

What size extinguishers fit? 20 lb and 30 lb in 8.5" square slots. The most common industrial sizes for Class A, B, and C protection.

What's the difference between the 2x6 and 3x4 configurations? Same capacity (12 extinguishers), different shape. The 2x6 (56" x 22") is long and narrow — ideal along walls and in aisles. The 3x4 (43" x 33") is nearly square — better for corners and open areas.

Is this designed for OSHA requirements? Yes — slot height and clearance are designed around OSHA 1910.157, and it uses OSHA-designated safety yellow. Compliance is determined by your installation and inspections.

Can I move it with a forklift? Yes. Built-in forklift pockets — relocate fully loaded, no disassembly.

Is this rack made in the USA? Yes. All Blue SteelCo fire extinguisher storage racks are fabricated in the USA using American steel.