12 Place Fire Extinguisher Storage Rack W/ Legs (3X4)

• Square 3x4 Footprint — Nearly equal length and width (43" x 33") makes this rack ideal for corner placement, island positioning, or anywhere a compact square layout works better than a long rectangle.

• Expanded Metal Base & Sides — Self-cleaning design lets dirt, water, and debris fall through. No manual cleanout.

• Powder-Coated Safety Yellow — OSHA 1910.144 high-visibility finish. Resists chipping, scratching, and corrosion.

• Built-In Forklift Pockets — Move the fully loaded rack without unloading. No disassembly required.

• 10-Inch Legs — Elevates extinguishers above floor hazards. Exceeds OSHA 4-inch minimum clearance.

• Discharge Identification — Open-slot design lets you visually spot discharged units without pulling them out. Cuts recharging service time.

This rack supports compliance with:

• OSHA 1910.157 — Portable fire extinguisher accessibility, mounting height, and travel distance requirements • OSHA 1910.144 — Safety yellow color coding for caution • NFPA 10 — Storage, spacing, monthly inspection, and annual maintenance standards

Also available in 2x6 configuration (SH10038) for spaces where a longer, narrower rack is preferred.

What size extinguishers fit? 20 lb and 30 lb in 8.5" square slots. The most common industrial sizes for Class A, B, and C protection.

What's the difference between the 3x4 and 2x6 configurations? Same capacity (12 extinguishers), different shape. The 3x4 (43" x 33") is nearly square — better for corners and open areas. The 2x6 (56" x 22") is long and narrow — better along walls and in aisles.

Does this meet OSHA requirements? Yes. Exceeds OSHA 1910.157 minimum clearance, maintains accessibility, and uses OSHA-designated safety yellow.

Can I move it with a forklift? Yes. Built-in forklift pockets — relocate fully loaded, no disassembly.

Is this rack made in the USA? Yes. All Blue SteelCo fire extinguisher storage racks are fabricated in the USA using American steel.